Setting up a Brick Paver Walkway or Aac Bricks

The use of Bricks or Pavers to develop a sidewalk or patio area matches a house in a way that is unmatched. In addition, installing a Brick or Paver walkway does not always require a pro.

The secret to setting up a Brick or Paver Walkway is to very first correctly prepare the area where the bricks/pavers are to be set up. In addition, string lines need to be strung on each side of the sidewalk.
As soon as the location has actually been dug down, 3/4" gravel stone must be laid in and tamped down tightly. The height in between the tamped down sand and the stringline ought to equate to the thickness of the brick or paver.

Now that you have a steady base, place a 1" pipe or journal board the length of the walkway on either side of the pathway. Then using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will produce a level area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Install a work on both sides of the prepared area. These strips will serve as your sidewalk border and help to maintain the integrity and shape of the walkway. You can get these plastic strip borders at many house enhancement shops. The strips need to be anchored down with 12" galvinized nails. You ought to sink these nails into the ground and through the strips every foot.

You can then begin to lay the bricks/pavers when this is done. There are numerous patterns you can lay. I particularly like the Herring Bone pattern. The key to laying the bricks/pavers is to ensure that they interlock with each other. Always stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will once again help preserve the integrity of the pathway.

Inevitably bricks/pavers will need to be cut or divided when building the pathway. To in fact cut/split the brick/paver, lay it in a bed of sand and place the sculpt at a 75 degree angle over the area where you desire to break the brick. If your sidewalk has curves you will require to buy/rent a wetsaw.

After installing the bricks, develop the outdoors edges with extra sand, and after that shovel in the topsoil and load down securely.
Lastly, spread stone dust over the brand-new walkway and sweep into the fractures. get more info Repeat this procedure a number of times to ensure the cracks are totally filled. This will finish the interlocking of the bricks and assist to get rid of any weed development. Just include lawn seed to the outdoors edges and you must have a stunning entryway to your home within a couple of weeks.


In addition, installing a Brick or Paver walkway does not always require a pro. The secret to setting up a Brick or Paver Walkway is to very first effectively website prepare get more info the area where the bricks/pavers are to be set up. Now that you have a steady base, place a 1" pipe or ledger board the length of the walkway on either side of the walkway. These strips will act as your pathway border and help to keep the stability and shape of the pathway. Inevitably bricks/pavers will need to be cut or split when building the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *